Everything you need to start gluing claw blocks, in one bucket.<\/strong><\/p>\n The kit contains:<\/p>\n Everything comes packed in a sturdy bucket.<\/p>\n Fix Blue<\/strong> is a professional 2-component PU glue for fixing claw blocks to cattle claws quickly and reliably. It bonds strongly, gives you a practical working time and has a high viscosity, which makes it suitable for both professional hoof trimmers and farmers who fit claw blocks themselves.<\/p>\n The working time is about 10-20 seconds<\/strong>, and after at least 4 minutes<\/strong> the block can take full weight. The glue is thicker than many traditional claw glues, so it runs off less and fills gaps between claw and block well.<\/p>\n You do not need a heat gun<\/strong>. For good adhesion, claw and block must be clean and dry. Too much heat speeds up the reaction and weakens the bond.<\/p>\n Store and use Fix Blue at 0 to 23 \u00b0C<\/strong>. Outside that range we advise a climate box. The glue may be used without a certificate<\/strong> and carries no H351 hazard statement<\/strong>.<\/p>\n Starter kit FF Fix Blue 200 ml Everything you need to start gluing claw blocks, in one bucket. The kit […]<\/p>\n","protected":false},"featured_media":22706,"template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[1178,1096,1466,1192,1079],"product_tag":[],"class_list":["post-22721","product","type-product","status-publish","has-post-thumbnail","product_cat-cattle","product_cat-cattle-claw-health","product_cat-claw-glue","product_cat-claw-health","product_cat-claw-health-cattle","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"acf":[],"yoast_head":"\n\n
FF Fix Blue 2-component PU claw glue<\/h3>\n
Advantages of Fix Blue<\/h3>\n
\n
How to use Fix Blue<\/h3>\n
\n
Store and use Fix Blue at 0 to 23 \u00b0C<\/strong>.<\/li>\n
Clean the claw and dry it well.
Do not use a heat gun.<\/strong><\/li>\n
Put the cartridge into a suitable dispensing gun.<\/li>\n
Unscrew the locking ring and remove the cap.<\/li>\n
Press out a little glue until it comes from both compartments<\/strong>. Discard this unmixed glue.<\/li>\n
Fit the original Quadro mixing tip MFQ8.7-24 (15.5 cm)<\/strong>, put the locking ring back and tighten it.<\/li>\n
Spread the glue evenly on the block or on the claw.
Note:<\/strong> do not apply the glue in several layers.<\/li>\n
Put the block on the claw straight away and press it on firmly<\/strong>, so the glue fills the unevenness of the claw and the grooves in the block. Keep a glue layer of about 3 mm<\/strong> between claw and block.
Applying the glue and positioning the block must take no more than 10-20 seconds<\/strong>.<\/li>\n
Do not touch the block after placing it. After 4 minutes<\/strong> the glue has fully cured and can bear weight.<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"